The Fika Wallart system assembles in minutes in just three easy steps, with no tools required and no loose parts to worry about. To re-use again and again, simply order a new wall art print and once you’ve received your order, insert the new graphic in place of the old one. Fika Wallart can even be used outdoors as well as indoors, and it will last for years to come.
Step 1
Build out the frame by laying out the four frame panels and corner connectors in the required shapes.
Step 2
Build out the frame by laying out the four frame panels and corner connectors in the required shapes.
Previous slide
Next slide
HOW DO YOU ASSEMBLE FIKA WALLART?
Fika Wallart assembles in 4 easy steps:
Step 3
Step 4
Step 5
Step 6
Previous slide
Next slide
HOW DO YOU CHANGE THE Wall Art FABRICS?
To install your fabric graphic:
Step 1 With clean hands, press the SEG silicone edges into the corners of the frame.
Step 2 Go back and press the silicone edge into the centre – on each side of the frame.
Step 3 Go back and press the silicone edge once again on each side previous center, on all four sides. Repeat this process, (WORKING IN CENTERS) until the SEG fabric’s edge is pressed approximately every 6 inches apart.
Step 4 After all silicone edging has been pressed into the frame, lightly tap your forefinger along the frame to smooth the fabric between the tucks.
Step 9
Build out the frame by laying out the four frame panels and corner connectors in the required shapes.
Step 10
Build out the frame by laying out the four frame panels and corner connectors in the required shapes.
Step 11
Build out the frame by laying out the four frame panels and corner connectors in the required shapes.
Step 12
Build out the frame by laying out the four frame panels and corner connectors in the required shapes.
Step 13
Build out the frame by laying out the four frame panels and corner connectors in the required shapes.